1. Home
  2. /
  3. Shaft Alignment And Coupling
  4. /
  5. NXA-PRO


NXA-PRO Device – Shaft Alignment And Coupling

Category: Shaft Alignment And Coupling
  • It has a lifetime warranty (thirty years) and a wireless alignment system
  • Ability to align horizontal and vertical shafts
  • Ability to display misalignment live – View misalignment live due to the slightest change in the foundations
  • Ability to check the looseness of the bases – Soft Foot
  • The ability to define target values ​​- for shafts that should be installed misaligned in the cold state to be aligned in the hot state
  • The ability to define and store the dimensions and information of an unlimited number of cars in memory for future use
  • The ability to remove vibrations during alignment – vibrations caused by the surrounding machines working to the desired machine
  • The possibility of effortless alignment of machines with long spacers (smaller equal to 10 meters)
  • Ability to align in direct sunlight without the slightest limitation
  • Completely user-friendly – such that all the menus of the device are in the form of icons and schematics, and there is no text in the menus
  • It has a battery charge display for laser sensors
  • The ability to rotate the schematic of the car on the device screen according to the movement of the user around the car
  • Ability to align multiple shafts at the same time – Machine Train
  • The ability to discover the target values ​​- obtaining the amount of misalignment of the shafts in the cold state to achieve the alignment in the hot state
  • The ability to discover the target values ​​- if the couplings are located in the casing and it is not possible to quickly access the coupling immediately after turning off the machine – OL2R module – Optionally
  • The ability to measure Run out using the wireless connection of the Run out probe sensor – Optionally
  • The ability to measure the slope of vertical and horizontal surfaces and check the verticality of the surface using the Level sensor – Optionally
  • Ability to add Non-Rotating Part fixture for non-rotating shafts – Optionally
  • Ability to align non-level shafts with Gardan coupling – Offset module – Optionally


There are no reviews yet.

Be the first to review “NXA-PRO”

Your email address will not be published. Required fields are marked *

Related products